Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The San Francisco Owner’s Guide
KraftMaid cabinetry and millwork show up in a lot of San Francisco home additions and ADU projects, and when a cabinet box, door, drawer glide, or hinge fails mid-project or after move-in, you need a contractor who knows the line without fumbling through a catalog. We install and service KraftMaid-compatible components across San Francisco, with full home additions running $53,100 – $153,400 and ADU construction at $106,200 – $259,600 depending on scope, site access, and finish level. Most owners discover a problem the same way: a drawer that suddenly binds, a soft-close hinge that slams instead of eases, or a cabinet face that pulled loose from its frame after the building settled. The good news is that KraftMaid parts are standardized across model years, which means the right piece usually exists and the fix is rarely a mystery.
We’re an independent San Francisco remodeler, not a factory service arm for KraftMaid, and that’s actually useful for you: we match OEM components when they matter and a honest aftermarket equivalent when it makes more sense. Either way, you get a written price before work starts and the 365-Day Done Right Promise behind the install.
Which KraftMaid Models This Applies To
KraftMaid has run several cabinet lines over the years, and most San Francisco homes built or remodeled since the early 2000s carry pieces from the Core, Vantage, or established door-profile families. The compatibility gotcha most people hit is this: KraftMaid changed their hinge bore pattern on certain frameless and inset door styles around 2016, so a hinge that fits a 2012 Vantage door will not always mount cleanly on a 2019 one. The way to know what you have is not the door style alone. Open a drawer or door and look for the printed label on the inside of the cabinet box or on the side of the drawer head. KraftMaid stamps model codes there, and that code is the fastest path to the correct replacement part.
For San Francisco specifically, we see a lot of KraftMaid cabinetry in ADUs built during the post-2018 accessory dwelling unit push, and those boxes run the same hardware families as the main-house kitchens from earlier years. If the label is gone or scuffed beyond reading, take a photo of the hinge plate, the drawer glide, and the cabinet interior, and call us. We’ve matched enough of these to tell you within a few minutes whether you need a factory part or whether a Blum or Salice equivalent will do the job at half the cost.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
- Drawer glides bind, stick, or drop on one side. The under-mount glide has lost a bearing or the mounting clip slipped. This is the single most common failure we see in San Francisco ADUs, where coastal humidity works on the steel over time.
- Soft-close doors slam shut instead of easing. The damper inside the hinge cup has blown its seal. Once that happens, no adjustment brings the soft-close back, and the hinge needs replacement.
- Cabinet face or door pulls away from the box. High-moisture years in fog-heavy neighborhoods like the Outer Sunset cause the particleboard core to swell at the screw points. The face may be salvageable with a rebored hole and a new hinge plate.
- Toe kick or end panel delaminates at the bottom. Water from mopping or a slow appliance drip wicked up into the board. KraftMaid’s newer moisture-resistant cases hold up better, but older runs will lift and flake over time.
- Adjustable shelf clips or pins crack and drop the shelf. The plastic pins get brittle after a decade of temperature swings in unconditioned San Francisco rooms. A cheap part, but a dropped shelf full of dishes is not a cheap result.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For cabinet and millwork repair inside a San Francisco home addition or ADU, the work usually falls in these bands: a drawer glide or hinge replacement runs $470 – $2,125 installed, depending on how many units and whether we’re matching OEM KraftMaid or a quality aftermarket equivalent. A full cabinet installation within an addition or ADU lands at $4,720 – $15,340, and that includes tear-out of the failed boxes, substrate repair if moisture got behind them, new cabinet assembly, and hardware mounting. The wider variation comes down to accessibility: a second-story ADU over a tight staircase costs more to run materials through than a ground-level garage conversion.
Every one of those prices is a written line-item quote before the first tool comes out. The 365-Day Done Right Promise covers the workmanship and the parts we install for a full year. If a hinge fails or a drawer binds inside that window, we come back and fix it at no charge. That’s the Garrison Standard in writing, and Curtis Lane has never signed a job off without it.
| Scope | Typical Installed Range (San Francisco) |
|---|---|
| Hardware repair (hinges, glides, clips) | $470 – $2,125 |
| Cabinet installation in addition or ADU | $4,720 – $15,340 |
| Full home addition | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
DIY or Call Us?
There are a few things you can safely check before you pick up the phone. Is the drawer off its track but the glide itself still smooth? Push it back into the clip and test again. Is a hinge screw loose? Tighten it with a #2 Phillips and see if the door re-seats. Those are five-minute fixes.
Where owners get into trouble is buying a “universal” hinge or glide from a big-box store and drilling new holes into a KraftMaid face frame. Once you wallow out the old bore or split the cabinet stile, the repair jumps from a $75 part swap to a full door or box replacement. San Francisco’s older homes have enough surprises behind the walls without adding a broken cabinet frame to the list. If the glide is bent, the hinge is blown, or the face panel is swollen, call (831) 610-5598. We’ll give you a straight number over the phone and a written quote before we touch anything.
FAQs
In San Francisco’s coastal humidity, we typically see KraftMaid cabinet boxes hold up for 25 – 35 years with basic care, while hinges and drawer glides tend to fail in a 10 – 15 year band depending on use and moisture exposure. Fog-side neighborhoods like the Outer Sunset and the Richmond push that wear cycle faster than inland areas. If your hardware is at the edge of that range, call (831) 610-5598 for a free assessment before small wear becomes a bigger repair.
No, once a soft-close damper blows or a glide bearing catches, the internal mechanism is done and no adjustment restores it. Replacing the hardware is the honest fix and it’s usually less expensive than repeated callbacks. We’ll quote you the exact part and labor before we start.
Most hinge or glide replacements on a single cabinet run under two hours. A multi-cabinet hardware refresh through a whole kitchen or ADU typically takes half a day to a full day depending on access, and we’ll tell you that window on the phone.
We keep the common KraftMaid hinge plates, soft-close hinges, under-mount glides, and shelf clips in the truck, plus the aftermarket equivalents from Blum and Salice that fit most door bores without modification. If you need a full cabinet box or a matched door profile, we order factory-direct and the lead time depends on the finish.
Bradford Remodeling Co San Francisco installs and services KraftMaid components in San Francisco home additions and ADUs every month. We also work with cabinetry and surface lines from Cambria, Silestone, and Kohler when a project calls for them. If your project has a failing cabinet, a missing hardware piece, or a full ADU scope that needs a disciplined crew, call (831) 610-5598 for a free estimate. Straight number, real scope, no surprises at close-out.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.
