Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The San Francisco Owner’s Guide
We stock Wellborn-compatible cabinet parts, hinges, drawer glides, and door fronts and install them throughout San Francisco, with most complete kitchen remodels running $16,520 to $53,100 depending on cabinet count, finish grade, and whether we’re replacing boxes or just fronts and hardware. If your Wellborn door won’t close square, a drawer grinds on its track, or a hinge has pulled loose from the face frame, we can usually match the part from our truck stock same-day in many San Francisco neighborhoods. Most homeowners discover a failed part when a lower cabinet door starts catching the adjacent door, or when a drawer bottom sags after years of coastal moisture working on the substrate.
Bradford Remodeling Co San Francisco is an independent service provider, not affiliated with Wellborn. We work with Wellborn cabinetry because the manufacturer publishes real specifications for their lines, which means we can order the correct replacement part instead of guessing at the job site.
Which Wellborn Models This Applies To
Wellborn builds cabinetry across several series lines, and the parts you need depend on which line your kitchen came with. The Estate Series uses full-height door panels and heavier face frames, while the Premier Series and Cabinetworks lines use slightly narrower stiles and rails. A hinge that fits a Premier door will not always sit flush on an Estate door because the bore depth on the cup hinge differs by two millimeters. That is the kind of mismatch that leaves a door hanging proud of the frame by an eighth of an inch, and it is the most common compatibility gotcha we correct in San Francisco homes.
To identify the right part, look inside the cabinet door or drawer box for a small white or silver label with the Wellborn code. It will list the cabinet model, the finish code, and the production date in a format like “WB-EST-CH-2019.” If the label is gone, measure the hinge bore diameter and the overlay: Wellborn doors are typically a 1/2-inch overlay on face-frame cabinets, which means the door overlaps the opening by half an inch on all four sides. We keep OEM Wellborn hinges, drawer guides, and door bumpers on hand, and for discontinued drawer boxes we source a quality aftermarket equivalent that matches the original reveal.
Styles & brands we work with
Signs Your Wellborn Kitchen Remodeling Is Failing
- Doors drifting out of alignment. The top hinge plate has worn or the mounting screw has stripped out of the face frame. On older Wellborn cabinets in fog-belt San Francisco homes, the wood behind the screw can soften from repeated humidity swings, and retightening alone won’t hold.
- Drawers that grind or stick halfway. The nylon roller on the guide has flattened, or the guide rail has bent. Wellborn’s older roller-guide system wears faster than the newer soft-close undermount glides, especially in high-use base cabinets.
- A corner joint opening up on a door. The cope-and-stick joint has failed, usually after years of the door absorbing moisture on the bottom edge from a damp floor or an under-sink leak. You’ll see daylight through the joint at the lower outside corner first.
- Hinges that won’t stay adjusted. The adjustment screw has bottomed out because the cup has wallowed in the door bore. This is a hinge replacement, not a tightening job, and a new screw in the same hole won’t fix it.
- Sagging drawer bottoms. The Masonite or plywood bottom panel has absorbed moisture and bowed, or the dado groove has widened. This is common in San Francisco kitchens where a dishwasher vents warm, humid air against the adjacent cabinet run.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the installed price ranges for San Francisco, with the parts and labor already rolled in:
| Job | Installed Price Range |
|---|---|
| Full kitchen remodel with Wellborn cabinets | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation only | $4,720 – $15,340 |
| Kitchen island installation | $3,540 – $11,800 |
What moves a job from the bottom of that first range to the top in San Francisco is the condition of the existing cabinet boxes, whether we’re doing a full tear-out or a reface, and the finish grade you choose. Every quote is a written line item price before we start, no numbers that move at the door. The 365-Day Done Right Promise covers the full job for one year: if a hinge fails, a door binds, or a drawer guide gives out inside that window, we come back and correct it at no charge. That’s The Garrison Standard, and we put it in writing on every job.
DIY or Call Us?
You can safely check a few things before calling: look for the Wellborn label to identify your line, tighten a hinge adjustment screw that has simply backed out, and check whether a drawer is catching on a dislodged pot or a shifted pan divider. Beyond that, cabinet work goes wrong in ways that aren’t obvious until the door is on and the reveal is off. Replacing a cup hinge requires boring a new hole to the correct depth in the same location, or the door will never seat. Matching a finish on a replaced door front means ordering the same finish code and allowing for natural aging differences. If the cabinet box itself has delaminated from water damage, the repair is structural, not cosmetic. Call (831) 610-5598 and we’ll give you a straight number, real scope, and a written price before any work starts.
FAQs
Wellborn face-frame cabinets typically hold 20 to 30 years in San Francisco homes, but the hardware, hinges, and drawer guides usually need replacement at the 10-to-15-year mark. Coastal humidity shortens the life of the finished surfaces on the bottom edges of doors, especially near dishwashers and under-sink cabinets. Call (831) 610-5598 and we’ll give you a realistic lifespan number for your specific cabinet line and exposure.
Yes, in most cases. If the box is sound and the only problems are worn hinges, bad drawer glides, or a failed joint on a single door, we repair the part and leave the rest of the kitchen alone. We only recommend full replacement when the box has water damage, the face frame has pulled away, or the finish on a whole run has failed beyond spot touch-up.
Most full Wellborn kitchen remodels in San Francisco run six to ten weeks from tear-out to final walkthrough, depending on whether the footprint changes and what we find behind the existing cabinets. A cabinet-only swap or a door-front replacement can often be done in a week. We put the timeline in writing in your scope document before we start, and we hold to it.
We keep common Wellborn hinges, drawer guides, bumpers, and mounting hardware on our truck when we schedule a repair call in San Francisco. For finish-matched door fronts, drawer boxes, and specific trim pieces, we order directly using the Wellborn cabinet code from your original installation or the production label inside the cabinet. We also stock parts for KraftMaid, Cambria, and Silestone lines for mixed-kitchen homes.
Call (831) 610-5598 for a free estimate. A real person answers, we’ll schedule the visit, and you’ll have a written price before the first tool comes out.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.
