Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The San Francisco Owner’s Guide
Bradford Remodeling Co San Francisco handles CGI kitchen remodeling projects including cabinet installation, countertop replacement, backsplash work, and full kitchen overhauls with installed pricing that typically runs $16,520 to $53,100 depending on scope. We keep a documented roster of kitchen products on hand from KraftMaid, Cambria, Silestone, and CGI-compatible lines, so the parts conversation doesn’t stall on availability. Most San Francisco homeowners call us after a cabinet hinge has stripped out of the face frame, a drawer glide has bent, or a countertop seam has opened near the sink.
Which CGI Models This Applies To
CGI kitchen lines span cabinet series with different face-frame depths, hinge bore patterns, and drawer-box construction. The practical compatibility question is less about the marketing name on the cabinet and more about three measurements: the hinge cup diameter (usually 35mm), the face-frame opening width, and the drawer glide length, which runs 10 to 22 inches depending on the cabinet depth. On the finishing side, CGI-style cabinet boxes built for overlay doors won’t line up with inset frames or full-overlay matching from another series. If the cabinet label is gone, we match from the hole pattern and the glide mount style. For older San Francisco homes where humidity from fog cycles faster than most of California, face-frame joints loosen more in upper cabinets near range hoods and dishwashers. We spec an OEM match where the part is structural, and a quality aftermarket equivalent where the original part was the weak point to begin with, like a soft-close piston that was under-spec’d for the door weight. Bradford Remodeling Co San Francisco is an independent service provider and is not affiliated with CGI.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Cabinet door drifting out of alignment at the hinge. The hinge plate screws have lost purchase in the face frame, common on particleboard frames in kitchens that run humid, and the door hangs lower on the latch side.
- Drawer that grinds or catches mid-pull. One of the glide bearings has gone flat or the glide has bent from an overloaded drawer, which is more common on 18-inch and wider drawers.
- Countertop seam separating near the sink or dishwasher. Silicone bead has broken down and moisture has worked into the seam, which in San Francisco’s salt air and fog cycle expands and contracts the joint more than inland installs.
- Soft-close door slamming instead of damping. The piston in the hinge or the catch clip has blown out from repeated load, and the door closes at full speed against the frame.
- Tile backsplash cracking along the counter line. The substrate behind the tile has shifted or the house has settled enough to transfer movement into the grout, more visible on longer runs facing exterior walls.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Francisco, a CGI kitchen remodel replacement typically lands between $16,520 and $53,100 installed. That’s the full scope range, from a small galley kitchen refresh to a larger footprint with island and new countertops. What pushes a job toward the top of that range is substrate repair: if the existing cabinet boxes are shot or the countertop underlayment has water damage, those items are line items in the written price, not hidden surprises at close-out. Here’s the breakdown of common component-level work:
- Cabinet Installation: $4,720 – $15,340
- Countertop Installation: $2,360 – $7,670
- Backsplash Installation: $945 – $2,950
- Kitchen Island Installation: $3,540 – $11,800
Every Bradford Remodeling project gets a written price before any work starts, and the number doesn’t move at the door. The completed work carries the 365-Day Done Right Promise: if anything fails inside that year, we come back and make it right at no charge.
DIY or Call Us?
What a homeowner can safely do is identify the part: take the hinge or glide off and bring it to a hardware counter for a match, or snap a photo and send it to us. What goes sideways fast is swapping glides or hinges without checking face-frame condition first, because a new glide on a compromised frame fails again in months. Electrical and gas work near the kitchen is not a DIY job, and kitchen remodeling that touches load-bearing walls needs a structural read before a sledgehammer. Countertop slabs can weigh hundreds of pounds and a broken stone edge takes a finger or a toe before it stops. If you want a straight read on the part and the repair, call (831) 610-5598 and we’ll scope it in writing.
FAQs
A properly installed CGI kitchen with cabinet boxes, countertops, and finishes typically lasts 15 to 25 years in San Francisco’s climate, with hinges and soft-close hardware being the first components to wear out, usually around the 8 to 12 year mark depending on kitchen humidity and use. Call (831) 610-5598 for a written scope and real numbers.
Yes, in some cases a stripped hinge screw hole can be re-bored and refilled with a proper wood insert, and a bent glide can be straightened or re-mounted, but if the face frame has rotted or the glide rail is worn through, replacement is the only honest fix and we’ll show you why in the written scope. Call (831) 610-5598 for a free estimate.
A component-level replacement like a hinge or glide swap runs one day, while a full CGI kitchen remodel in San Francisco typically runs 4 to 8 weeks depending on countertop fabrication and any permit-required rough-in work. Estimates are free, call (831) 610-5598.
We keep the most common cabinet hinges, drawer glides, soft-close pistons, and sealant systems on the truck for the San Francisco area, and special-order anything outside that with a documented lead time so the written schedule doesn’t drift. Call (831) 610-5598 to check your specific part.
If you’re in San Francisco and you’ve got a CGI kitchen part that’s failed or a kitchen remodel falling behind, call (831) 610-5598. We’ll give you a straight number, a real scope, and no surprises at close-out.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.
