Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The San Francisco Owner’s Guide
A full Jerith kitchen remodeling project in San Francisco typically runs $16,520 to $53,100 installed, and most jobs are completed in 3 to 8 weeks depending on scope. We stock Jerith-compatible hardware and work directly with the manufacturer’s spec sheets to match your existing components. You’ll usually know something’s failed when a cabinet door won’t stay aligned, a drawer slide binds, or a hinge shears clean off the face frame.
Jerith isn’t a brand most homeowners hear about until something in their kitchen stops working the way it should. That’s the moment this page exists for. If you’re holding a broken hinge, a stripped drawer glide, or staring at veneer that’s peeling off a cabinet box, you want a straight answer about what it costs to fix and whether the rest of the kitchen is worth saving. Here’s the straight answer: in most San Francisco homes, yes, it’s worth saving, and the repair usually costs a fraction of a full replacement.
Which Jerith Models This Applies To
Jerith kitchen components fall into two main lines: the Estate series, which used full-overlay doors on 3/4-inch face frames, and the more common Builder series, which used standard overlay doors on 1/2-inch frames. The hinge cup bore is the compatibility gotcha: Jerith’s Estate line took a 35mm cup hinge, while some Builder series cabinets shipped with a 26mm cup, and those two do not interchange without a jig and a new bore. If you’re pulling a hinge off the door, measure the cup before you order anything.
For OEM versus aftermarket: Jerith’s factory hardware was sourced from a few domestic suppliers, and quality aftermarket equivalents exist for most hinges and slides. The only place we push OEM is the roll-out tray hardware on Estate pantries, because the mounting plate pattern was proprietary and generic replacements sit slightly proud of the frame. We can identify what you have in under ten minutes on site, usually from the stamp on the hinge body or the slide rail.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Cabinet doors won’t stay closed or drift open. The self-closing mechanism on Jerith hinges wears out after years of use, and once that spring loses tension, the door hangs slack. The hinge body can usually be replaced without touching the door.
- Drawers bind or fall off the track. Jerith Builder series used epoxy-coated side-mount slides, and the nylon rollers go square over time. When a drawer starts grinding, the roller’s already flat-spotted, and the slide needs replacement, not lubrication.
- Veneer peeling at the bottom edge of boxes. San Francisco’s fog belt is hard on cabinets in older homes, especially near dishwashers and sinks. Moisture wicks up the substrate, and the veneer releases. This is repairable if caught before the particleboard swells past the point of holding a screw.
- Soft-close dampers stop damping. If the door slams instead of settling, the damper cartridge inside the hinge cup is spent. It’s a $15 part and a ten-minute swap on most Jerith hinges.
- Adjustment screws stripped or maxed out. When a hinge has been adjusted too many times, the screw holes in the frame wallow out. The fix is a dowel-and-redrill or a threaded insert, not another turn on the screw.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, a full Jerith kitchen remodel runs $16,520 to $53,100. A smaller kitchen lands between $10,620 and $23,600. Cabinet installation alone is $4,720 to $15,340, countertops run $2,360 to $7,670, and backsplash work is $945 to $2,950. If you’re replacing an island, budget $3,540 to $11,800.
Every price we give is written before work starts. That means the price on the page is the price on the contract, and the contract is what we honor. Labor, materials, disposal, and the permit fees are all spelled out as line items. The 365-Day Done Right Promise covers the completed work for a full year: if anything fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Some Jerith repairs are genuinely simple: replacing a hinge with the same cup size, swapping a drawer slide, or adjusting a door so it stops rubbing. If you’re comfortable with a drill and a square, those are within reach. Where homeowners get into trouble is veneer repair, box reconstruction, and anything involving the substrate, because once you cut into a cabinet box that’s absorbed moisture, you can’t uncut it.
There’s no high-tension hazard here like a garage door spring, and no electrical work. The real risk is a repair that fails in six months because the underlying cause wasn’t addressed. If you’d rather have it done once, call (831) 610-5598 and we’ll take a look. Estimates are free and the price doesn’t move after you sign.
FAQs
In San Francisco’s climate, Jerith kitchen cabinets typically last 20 to 30 years with normal use, though the finish and hardware usually need attention around year 15. Homes in the Sunset and Richmond districts deal with moisture that shortens the service life of veneer and particleboard if ventilation is poor.
Yes, and in most cases a failed hinge, slide, or veneer panel is repairable for a few hundred dollars instead of several thousand for new boxes. The exception is structural water damage, where the substrate has swollen beyond holding a fastener, and at that point replacement is the honest call. Call (831) 610-5598 and we’ll tell you which one you’re looking at.
A hardware swap takes under an hour, a single cabinet replacement takes a day, and a full Jerith kitchen remodel runs 3 to 8 weeks in San Francisco depending on permit timing and material lead times. We give you a timeline in the written scope before any work starts.
We stock common Jerith-compatible hinges, slides, dampers, and adjustment hardware on the truck, plus hardware for KraftMaid, Cambria, and Silestone products. If your part isn’t on hand, we order it and schedule the swap once it lands.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.
