







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Bathroom Remodeling: The San Francisco Owner’s Guide
A full ActiveYards bathroom remodeling project in San Francisco typically runs between $10,620 and $33,040, installed. We stock ActiveYards-compatible hardware and components on our trucks, and most partial replacements (vanities, fixtures, shower surrounds, pan bases) can be quoted and scheduled within the same week. The quickest way to pin down your number is to call (831) 610-5598 with your model information, and we’ll give you a written line-item price before any work starts.
Most homeowners discover a failed bathroom component the hard way: a shower base that’s flexing underfoot, a vanity door that no longer closes square, a drain that’s been slow for months and finally backed up. San Francisco’s hard water and fog-driven moisture accelerate wear on seals, gaskets, and wood substrates. If your ActiveYards bathroom is showing age, the failure usually starts small and compounds. We see it in the Outer Sunset regularly, where salt air and high humidity get into cabinet joints and shower surrounds faster than owners expect.
One thing to know up front: Bradford Remodeling Co San Francisco is an independent contractor. We’re not affiliated with ActiveYards, but we work with their product lines regularly and know how they’re built, how they fail, and what it takes to make the repair hold.
Which ActiveYards Models This Applies To

ActiveYards builds bathroom components across several series lines, and the compatibility details matter. The most common lines we encounter in San Francisco homes are the ActiveYards A-Series vanities, the Flex shower surrounds, and the YardCore bath systems. Each series uses different wall-mount brackets, drain offsets, and substrate thicknesses, which is exactly where DIY repairs go sideways.
Before you buy any replacement part, check the manufacturer label. ActiveYards stamps a series code and date on the inside of vanity doors, on the back of mirror frames, and on the underside of shower bases. That code tells you the series and production run, which determines whether an OEM replacement or a quality aftermarket equivalent is the right call. For high-wear items like hinges, drawer slides, and drain assemblies, we often recommend aftermarket parts that meet or exceed the original spec, because they’re faster to source and hold up better in San Francisco’s moisture-heavy bathrooms. For structural components like shower pan bases or wall panels, we insist on ActiveYards-manufactured parts. Mixing off-brand structural pieces voids the warranty path and creates fitment risk.
If you can’t find a label, take a photo of the part with a tape measure next to it and send it over. Curtis Lane can usually identify the series from a picture alone, especially for the common San Francisco installs.
Styles & brands we work with







Signs Your ActiveYards Bathroom Remodeling Is Failing
- Soft or flexing shower base. The substrate under the pan has likely taken on water and begun to rot. This is the most common failure we find in San Francisco bathrooms, where slow leaks go unnoticed under tiled floors for years. When the pan flexes underfoot, it’s not a cosmetic issue. It’s structural, and the fix is a full pan replacement with substrate repair.
- Vanity doors that won’t close square. Cabinet boxes in humid bathrooms absorb moisture and swell. Once the box is out of square, adjusting hinges buys a few months at best. The real fix is replacing the vanity with a properly sealed unit or rebuilding the face frame.
- Recurring mildew in the same spot. That’s not a cleaning problem. It means water is getting behind the surface. In ActiveYards shower surrounds, the usual culprit is a failed seam gasket or a cracked drain flange.
- Slow drains that keep coming back. San Francisco’s older plumbing combined with ActiveYards’ low-profile drain designs can create buildup points. If snaking doesn’t last, the drain assembly itself is usually the problem, not the line.
- Loose or corroded wall brackets. In fog-heavy neighborhoods like the Outer Sunset and Richmond District, we see metal brackets furring and failing in as little as five to eight years. ActiveYards uses coated steel in most series, but coastal salt air is hard on coatings.
Replacement Cost & What’s Included

Here’s the breakdown for ActiveYards bathroom remodeling work in San Francisco:
| Scope | Installed Price Range |
|---|---|
| Full ActiveYards bathroom remodel (vanity, shower, flooring, fixtures) | $10,620 – $33,040 |
| Small bathroom remodel (powder room or tight guest bath) | $5,900 – $14,160 |
| Walk-in shower installation (ActiveYards-compatible surround and base) | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement (base and surround only) | $3,540 – $10,030 |
| Bathroom vanity installation (ActiveYards A-Series or equivalent) | $945 – $3,540 |
The spread comes down to what’s behind the walls. A shower pan replacement on a slab foundation with intact substrate runs lower. A pan replacement where the subfloor has rotted and the drain needs re-routing runs higher. You get a written price before we start, and that price includes the part, labor, disposal, and a clean site at close-out. No change orders for hidden conditions we should have seen coming.
Every job is covered by our 365-Day Done Right Promise. If the work fails inside a year, we come back and correct it at no charge. That’s in writing, in your hand, before you sign anything.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a line between work an owner can safely check and work that belongs with a contractor, and the line matters here.
You can safely check the obvious: look for water staining under the vanity, test for soft spots around the shower base, inspect gaskets for cracking, and listen for hollow sounds when you tap the shower surround. These tell you the extent of the problem and they cost you nothing but time.
What you should not try to do yourself is pull a shower pan, rebuild a substrate, or re-route a drain. Once water has gotten behind tile or beneath a pan, you’re into structural territory. Get it wrong and you’ve turned a $4,000 pan replacement into a $25,000 floor and framing repair. We’ve seen it more than once in San Francisco homes where a handyman “had a guy” who could do it cheaper.
If you’re not sure which side of that line you’re on, call (831) 610-5598. We’ll look at photos, tell you what we think you’re dealing with, and give you a number. Straight number, real scope, no surprises at close-out.
FAQs

Expect 10 to 15 years from the original components in San Francisco’s coastal climate, with shower surrounds and pan bases on the shorter end of that range if the bathroom gets daily use. Cabinetry and vanities hold up better if they’re not in direct steam path, but fog-season moisture shortens everything. Proper sealing and ventilation extend the life noticeably.
Seam gaskets and drain flanges can usually be repaired if the damage is caught early and the substrate is still sound. Once water has been migrating behind the surround for more than a season, repair becomes a temporary patch. We’ll tell you honestly which one you’re looking at. Call (831) 610-5598 with photos and we’ll give you a straight read.
A full ActiveYards bathroom remodel typically takes 5 to 10 working days, depending on whether we’re doing structural work, moving plumbing, or working with tile. A simple vanity or shower surround replacement is usually 2 to 3 days. You’ll get a written timeline as part of your quote, and the 365-Day Done Right Promise starts the day we finish.
We stock the most common ActiveYards-compatible components on our trucks: shower bases in the standard 32×32, 36×36, and 60×32 footprints, drain assemblies, hinge kits, drawer slides, and the hardware for the A-Series vanities. For less common series or special-order finishes, we source from our supplier network and usually have parts in hand within 5 to 7 business days. We also stock KraftMaid, Cambria, and Silestone components when a remodel spans brands.
Get a Written Price for Your ActiveYards Bathroom Remodel in San Francisco
You don’t have to guess what it costs, and you don’t have to wait through a week of phone tag to get an answer. Call Bradford Remodeling Co San Francisco at (831) 610-5598 and tell us what’s failing. We’ll identify the part, confirm what series you have, and put a written price in front of you before any work starts. That’s how we’ve operated since 2004, as part of the Garrison Partners family, and it’s how every job closes here: clean site, documented scope, signed written guarantee in your hand.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.


