A Bradford company - serving San Francisco, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower

American Standard Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Francisco
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

American Standard Roofing: The San Francisco Owner’s Guide

American Standard roofing products, particularly the shingle lines and asphalt-based membranes distributed through their contractor network, are built for a long haul but not forever. We stock American Standard-compatible roofing materials and install replacements throughout San Francisco, with most roof repairs running $470 to $2,125 and full replacements landing between $9,440 and $23,600 depending on square footage and substrate condition. What typically brings owners to call us is a stain on the ceiling after a winter storm, granules piling up in the gutter, or a shingle that cracked loose during the wind that rips off the Pacific in late fall.

Call (831) 610-5598

American Standard entered the roofing category with a dealer-distributed line of asphalt shingles and accessory membranes, and while the brand is better known for HVAC equipment in some markets, the roofing products hold up reasonably well against the marine air here. San Francisco’s salt fog, damp mornings, and the way the fog sits on north-facing slopes means any roofing product gets pushed harder than its manufacturer’s mild-climate testing would suggest. That is why we see American Standard shingles that perform fine in San Jose or Sacramento give up earlier in the Outer Sunset or the Richmond, where the moisture never fully burns off.

Bradford Remodeling Co San Francisco is a member of the Garrison Partners family, established in 2004, and we are an independent service provider. We are not affiliated with American Standard and do not claim to be an authorized dealer. We do know the product, we stock the compatible parts, and we write a firm number before any work begins. This page is the resource we wish every American Standard roofing owner in San Francisco had before they called around.

Key takeaways:

  • Installed repair cost in San Francisco: $470 to $2,125.
  • Full replacement cost: $9,440 to $23,600.
  • We stock American Standard-compatible shingles, underlayment, and flashing on the truck.
  • The 365-Day Done Right Promise covers every completed repair or replacement, in writing.
  • Call (831) 610-5598 and a live person answers, 24/7.

Which American Standard Models This Applies To

A wood double vanity with two mirrors after a bathroom remodel

American Standard’s residential roofing line includes three-tier architectural shingle series plus a builder-grade three-tab line, and the compatibility details matter more than most owners expect. The architectural shingles are heavier than the three-tab line by roughly 20 to 25 pounds per square, which changes how we approach fastening, ridge cap sizing, and whether your existing roof deck can carry the additional load without sagging. A homeowner who has three-tab shingles installed and wants to switch to architectural needs more than a straight material swap.

The fast way to identify your exact part is to check the bundle wrapper if you still have one, or look at the back of a pulled shingle. American Standard stamps the series code on the underside of most of their architectural lines, and the color lot number lives there too. Color lot matters more than people expect: if you need a patch repair on an exposed slope, a shingle from a different production lot can turn visibly off-color in San Francisco’s flat morning light, even when both say “Weathered Slate.” We pull a sample from your roof before ordering patch stock.

For most San Francisco homes, the OEM-versus-aftermarket decision comes down to one question: what remains under warranty and what has expired. If the original install has remaining manufacturer coverage, we use genuine American Standard product to keep the claim clean. If the warranty is gone, we stock quality aftermarket equivalents from our documented brand roster that match dimension and wind rating, and we tell you exactly what we are putting up there and why. No generic “roofing shingle” line items. Every material is identified by manufacturer and spec on the written price.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your American Standard Roofing Is Failing

  • Granule loss collecting in gutters. The ceramic granules on asphalt shingles are the UV shield. Once they start sloughing off heavily, the asphalt beneath heats, oxidizes, and cracks. In San Francisco, this is the most common failure we see on south-facing slopes that get the brief but intense unfiltered sun from St. Francis Wood through the Mission Terrace corridor.
  • Curling at shingle corners or edges. Curling means the shingle has dried out to the point where it cannot lie flat, and water is getting under the edges. This is a leading indicator of a roof with two to four seasons left, not an emergency repair. We can document it, price the repair versus the replacement, and you choose.
  • Ceiling stains after heavy rain, even small ones. A stain, even a faint ring, means water moved through the roof assembly and sat somewhere long enough to evaporate. On older San Francisco homes with plaster ceilings, that stain can be invisible behind wallpaper for months. We say trace the stain first, not the shingle above it. Water travels forward and down along the deck before it shows up where you live.
  • Loose or missing flashing at pipes, skylights, or the chimney. In California, flashing works hardest during lateral wind-driven rain. San Francisco’s westerly storms hit north- and west-facing penetrations with water moving sideways, not just falling down. A loose pipe boot or cracked step flashing on the windward side fails before any shingle does.
  • Granules or shingle debris in the yard after a wind event. Shingles can fail in one storm if the seal strip has already let go and you never noticed. After a gusting front moves through, check the ground near your downspouts for unusually heavy granule buildup or actual shingle corners. Not the gutter contents from six months ago, but fresh debris.

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

Repairs on an American Standard roof in San Francisco run $470 to $2,125 installed. A full replacement runs $9,440 to $23,600. What pushes a job toward the top of that range is simple: roof accessibility, slope, number of layers being removed, substrate repair, and whether your decking is rotten around penetrations. San Francisco has a lot of older balloon-frame construction, and when we pull shingles on those houses, we often find deck boards that need replacement before new underlayment goes down. That is a real finding and we show it to you in writing before we spend another dollar.

Every price we write includes parts, labor, dump fees, and the permit when one applies. We do not use change orders as a business model. If we find something behind the shingles that changes the price, we stop and show you the condition in person, with a written revised number, before any extra work happens. That is The Garrison Standard at work: a written price before work begins, and a process for when the roof tells us something new.

All completed work carries the 365-Day Done Right Promise. That is a written guarantee covering a full year. If the roof we installed or repaired fails inside that window, we come back and correct it at no charge. Every customer gets that guarantee in writing, signed, at close-out. You also get a clean site. We do not leave old shingles stacked against your fence.

DIY or Call Us?

You can safely inspect your American Standard roofing from the ground or from a ladder if you keep both feet on it. Look at the gutters, the shingle edges, and the flashing at any pipe penetrations. You can photograph what you find and send it to us. That saves time and gives us a head start on the diagnosis.

What you should not do is get on the roof itself, especially on a San Francisco house with a steep pitch or a second story. Roof work is not a ladder-and-caution job. Falls from roofs and ladders are among the most common serious injuries on a home renovation site, and roofs near the coast in this city stay slick with fog condensation even on dry days. Working on the roof surface, lifting shingles, or attempting a patch on your own is a job for a trained professional with proper fall protection. We say that as the crew you want up there, not as a way to pressure you into hiring us.

If you have a leak, a missing bundle’s worth of shingles, or storm damage, call us at (831) 610-5598. We will get eyes on it and give you a straight number.

How Much Does an American Standard Roof Repair Cost in San Francisco?

In San Francisco, the installed cost for an American Standard roof repair typically runs $470 to $2,125. The final number depends on what failed, how much of the roof assembly we have to open up, and whether we are repairing one spot or several on the same roof.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Can You Fix the Flashing Only, or Do I Need Shingles Replaced Too?

In most San Francisco cases, you can replace just the flashing. Flashing at pipes and roof penetrations fails earlier than surrounding shingles in this climate, and the shingles around it are often still in serviceable shape. We will tell you if the surrounding shingles are too brittle to work with before we start, not after.

How Long Does an American Standard Roofing Job Take?

A focused repair on an American Standard roof is generally a one-day job once materials are on site. A full replacement in San Francisco takes longer, usually two to five working days depending on weather, decking condition, and the pitch of the roof. We give you a date range in the written estimate and stick to it.

Do You Stock American Standard Roofing Parts, or Do You Have to Order Them?

We stock the common American Standard-compatible shingle colors, underlayment, ridge caps, and flashing profiles on the truck, along with materials from our brand roster including GAF, CertainTeed, Owens Corning, and James Hardie for trim and accessory work. For exact color-lot matches, we pull a sample from your roof and order matched stock. We also stock parts for KraftMaid, Cambria, and Silestone for interior projects, so the same crew that handles your roof can handle the kitchen or bath if you are ever looking at that work too.

FAQs

A powder room with botanical wallpaper and a stone sink

Call Us for a Straight Number on Your American Standard Roof

If you have an American Standard roof in San Francisco that is starting to show its age, or a leak that appeared after the last storm, call us at (831) 610-5598. We will set an inspection, put the scope and price in writing, and stand behind the completed work with the 365-Day Done Right Promise. Straight number, real scope, no surprises at close-out. Curtis Lane and the crew at Bradford Remodeling Co San Francisco have been doing it that way in this city for a long time, and we do not plan to change it.

Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.

Getting started with Bradford in San Francisco

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your San Francisco team

A local crew that works across San Francisco and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Francisco? Licensed & insured · Free written quotes response · free estimates
Call (831) 610-5598
Areas We Serve

Request a Free Estimate in San Francisco

Tell us what you need - Bradford Remodeling Co San Francisco responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and consent to receive communications by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch