Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The San Francisco Owner’s Guide
KraftMaid bathroom remodeling in San Francisco typically runs $10,620 to $33,040 installed, depending on whether you’re replacing a single vanity or gutting the room to the studs. We stock KraftMaid-compatible cabinet parts, hinges, drawer slides, and door fronts on our trucks, and we can usually match your existing finish within one to two weeks. Most San Francisco homeowners discover they need this work when a cabinet door sags, a drawer slide binds, or water intrusion swells the cabinet box around the sink base. The symptom shows up small at first, then spreads.
Which KraftMaid Models This Applies To
We work with KraftMaid cabinetry across their Vantage, Venicia, and standard framed lines, which covers most bathrooms built in San Francisco condos, Edwardian flats, and single-family homes from the 1990s forward. The compatibility gotcha with KraftMaid is the hinge mounting pattern: older Venicia lines use a 35mm cup hole at a different setback than current Vantage boxes, so a hinge from one series will not seat correctly in the other. If you still have the original door, check the inside face for a small ink stamp or sticker with a five-digit code. That code tells us the door style, finish, and production year, which is what we need to match an order exactly.
For replacement doors, drawer fronts, and boxes, OEM is the right call when you want the finish to match what’s already in the room. KraftMaid’s finishes are baked in controlled batches, and a door ordered two years apart can show slight variation. Aftermarket hardware like hinges, slides, and pulls is often equal or better than OEM for less money, and we specify Blum or Salice components on most replacements because they outlast the original equipment. Bradford Remodeling Co San Francisco is an independent service provider; we are not affiliated with KraftMaid, but we order directly through their dealer network and verify every part against the original spec sheet before it goes on the truck.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Door sag or misalignment: The hinge screws have stripped out of the cabinet box, usually from years of steam cycling in a San Francisco bathroom with no exhaust fan. Shim and re-drill works short term; the box is often too far gone after a decade.
- Drawer slide rattle or stick: The nylon rollers inside the slide have worn flat, or the slide rail has corroded from fog-belt humidity. A new slide set is a quick fix if the drawer box itself is still square.
- Swollen cabinet box at the sink base: Water has been sitting on the cabinet floor from a slow supply line drip. Particleboard core expands and will not come back; the box gets replaced, not patched.
- Peeling door or drawer front finish: KraftMaid’s thermofoil and painted finishes delaminate when steam and heat cycle repeatedly. The MDF substrate underneath starts to crumble at the edges once moisture gets in.
- Loose or missing drawer glides: The mounting screws have worked free from the cabinet side panel, often because the panel itself has softened. Replacing the glide without addressing the panel means you’ll be back under the sink in six months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, a single KraftMaid vanity replacement with matching door and drawer fronts typically falls between $945 and $3,540 installed, including cabinet removal, new box assembly, and hardware transfer. A full bathroom remodel involving KraftMaid cabinetry runs $10,620 to $33,040, and the spread comes down to room size, whether you’re moving plumbing, and which finish tier you select. Every project gets a written line-item price before work starts, so you see the cabinet cost, hardware cost, labor hours, and disposal in black and white. The 365-Day Done Right Promise covers the installation work for a full year; if a hinge strips, a drawer binds, or a panel separates inside that window, we return and correct it at no charge. KraftMaid’s own manufacturer warranty covers the cabinetry itself, and we register that paperwork for you at close-out.
DIY or Call Us?
You can safely check a few things yourself: confirm whether the problem is the door or the box by lifting the door slightly while it’s open; if play disappears, it’s the hinge. Tighten hinge screws gently by hand and see if they bite or spin. Beyond that, this work turns on you fast. Replacing a vanity means disconnecting water supply lines, pulling the P-trap, and dealing with a cabinet that may be swollen tight against the wall. San Francisco’s older bathrooms have plumbing rough-ins that rarely line up with modern cabinet cutouts, and forcing a new box over an off-center drain means cutting structural panels and voiding the manufacturer warranty. For a straight answer on what your specific failure will cost to fix, call Bradford Remodeling Co San Francisco at (831) 610-5598. Straight number, real scope, no surprises at close-out. That’s how we run every bathroom job in San Francisco.
FAQs
KraftMaid bathroom cabinets typically last 15 to 25 years in San Francisco, with the wide range driven by bathroom ventilation. In fog-belt neighborhoods like the Outer Sunset and Richmond District, poorly vented bathrooms cycle steam through the cabinet boxes daily, which shortens hinge life and swells sink base cabinets faster than in drier parts of the city. If you run an exhaust fan during every shower, expect the longer end of that range. Call (831) 610-5598 for an assessment of your specific cabinets; estimates are free.
A failed door hinge, drawer slide, or hardware component can usually be repaired or replaced same-visit; a swollen cabinet box or delaminated door front generally cannot. The reason is the substrate: once moisture reaches the particleboard or MDF core, the material loses its dimensional stability and no clamp, shim, or adhesive brings it back. We’ll tell you which situation you have before quoting anything. Call (831) 610-5598 and we’ll walk through what you’re seeing.
A standard single-vanity replacement in San Francisco takes one day on site, start to clean site, assuming the plumbing rough-in lines up and the old cabinet comes out without wall damage. If we’re ordering a custom KraftMaid door or finish match, add one to two weeks for the manufacturer to ship the part. You’ll have a written timeline before any work begins, and the crew doesn’t leave until the vanity is leveled, the plumbing is leak-tested, and the site is swept. Call (831) 610-5598 to schedule your estimate.
Our trucks carry common KraftMaid hardware: 35mm cup hinges, drawer slides, mounting brackets, and a range of pulls and knobs in standard finishes. For finish-matched doors, drawer fronts, or entire cabinet boxes, we order through KraftMaid’s dealer network and typically have the part in hand within one to two weeks in San Francisco. Cambria, Silestone, and Kohler parts for bathroom and countertop work are also stocked or sourced through the same documented-brand process. Call (831) 610-5598 and we’ll check inventory while you’re on the phone.
If you’re in San Francisco and staring at a sagging KraftMaid door or a drawer that won’t close, we’ll give you a written price and a straight answer on whether it’s a fix or a replacement. Call Bradford Remodeling Co San Francisco at (831) 610-5598 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co – San Francisco, CA at Bradford Remodeling Co San Francisco, serving San Francisco and nearby areas.
