Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Oakland, CA | Bradford Remodeling Co San Francisco
We provide independent Mr-Glass service across Oakland, from frameless shower enclosure installs to tub-to-shower conversions in hillside homes and Craftsman bungalows. The one thing that makes our Mr-Glass work here different: we check the curb with a laser level before any track goes down, because slope-induced settlement in neighborhoods like Montclair and Oakmore throws off drainage in ways other installers miss. Call (831) 610-5598 to schedule a free estimate. We’re Bradford Remodeling Co San Francisco, an Oakland General Contractor that’s been putting Mr-Glass products into Oakland homes long enough to know the local failure points.
Why Oakland Residents Choose Us for Mr-Glass Service
Curtis Lane, our owner, grew up running a framing hammer around Los Angeles and trained in construction technology at LA Trade-Technical College, where he learned to read structural drawings and run a material takeoff before he ever stepped on a paying job site. That discipline carries into every Mr-Glass enclosure we install or repair in Oakland. We’re not a factory rep, and we don’t pretend to be. We’re an independent Mr-Glass service provider, which means we call the manufacturer’s design intent out when it works and we correct for Oakland’s real-world conditions when the factory spec doesn’t account for a house that’s been settling for ninety years.
Homeowners across Oakland call us because we show up with the right Mr-Glass OEM rollers, hinges, and seals on the truck, and because our crew has seen the specific ways marine air, soft-story framing, and out-of-plumb plaster walls stress glass enclosures here. We put every price in writing before work starts. Straight number, real scope, no surprises at close-out.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Oakland
- Corroded hinges and tracks on Mr-Glass frameless sliding doors. Oakland’s marine-influenced climate pushes damp, foggy air through hillside bathrooms year-round. Plated hardware pitts fast, and once the rollers start binding, the door fights you every morning. We swap in all-stainless Mr-Glass OEM hardware and adjust the track so the door rolls with one finger.
- Silicone seal failure around Mr-Glass enclosures in settling homes. Hillside lots with pier-and-beam foundations move more than most people realize. When the curb drops even an eighth of an inch, the silicone bead pulls away and water seeps onto the wood subfloor underneath. We remove the old bead, level the curb, and reseal with mildew-resistant silicone rated for wet-room conditions.
- Misaligned Mr-Glass sliding doors after foundation movement. Soft-story buildings and older Oakland homes with slight racking will throw a sliding door out of square. The rollers wear unevenly, the door binds, and eventually it jumps the track. We correct the alignment at the roller and, where needed, re-shim the bottom track to hold true.
- Stress cracks near drill holes in Mr-Glass panels. Out-of-plumb walls in Craftsman-era homes with plaster-over-wood framing put tension on the glass at the hinge points. If the installer forces the panel to a wall that’s off by more than a quarter inch, the tempered glass cracks at the drill hole. We shim and true the wall before remounting the panel.
- Mineral etching and glass pitting from hard water and fog. Oakland Hills bathrooms get a lot of condensation, and when that water evaporates on the glass surface, mineral deposits etch in. If the etching has penetrated the tempered glass surface, regrinding is not safe. We tell you straight: replacement is the call.
Mr-Glass Service in Oakland: What Local Conditions Mean for Your Equipment
In Oakland’s hilly neighborhoods like Montclair, many homes were built before modern waterproofing codes existed. That means a Mr-Glass shower enclosure frequently sits on a curb that is not level, because slope-induced settlement has been working on the house for decades. Our standard is to shoot a laser level across the entire curb before installing any Mr-Glass track. When the curb is off, we build a micro-slope shim bed so the glass drains inward toward the shower pan instead of outward onto the bathroom floor. On flatland homes built in the early 1900s, the problem is different for Kitchen Remodeling - Oakland projects and bathrooms alike: warm, dry summers stress aging wood, and older subfloors flex under foot traffic. That flex cracks rigid silicone joints, which is why we test for deflection before quoting any Mr-Glass enclosure repair. No two Oakland houses settle the same way, and a Mr-Glass install that doesn’t account for that will leak within two seasons.
Mr-Glass Models & Products We Service in Oakland
We work on the full Mr-Glass residential line that shows up in Oakland bathrooms: frameless sliding shower door series, pivot-hinge shower enclosure series, neo-angle shower enclosure series, and custom-cut tempered glass panels for tub-to-shower conversions. Our parts approach is simple and by the book. We use OEM Mr-Glass rollers, hinges, and seals whenever they’re available, because their geometry is specific to the track profile and watertight closure depends on that match. For discontinued hardware, we source dimension-matched aftermarket parts that meet tempered-glass safety standards, and we tell you which one you’re getting before we order it. We keep the most common Mr-Glass replacement parts in local stock so an Oakland repair doesn’t wait on a freight shipment from the East Coast.
Our crews see Mr-Glass cabinetry and shower enclosures across Oakland’s hillside remodels and seismic retrofits, from Craftsman bungalows to daylight-basement additions. We focus on the real-world installation and integration challenges of Mr-Glass products in this region, not on being a factory rep. Learn more about our Mr-Glass sales & service.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Oakland
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion with Mr-Glass Enclosure | $3,500 – $10,000 |
| Shower Replacement with Mr-Glass Glass | $3,000 – $8,500 |
What drives the price in Oakland is the condition of the curb and the wall behind the enclosure. An out-of-level curb on a hillside home adds shimming time. A plaster wall that’s drifted out of plumb adds truing time. We cover all of that in the written estimate before you approve anything. Free estimates include a full site check: curb level, wall plumb, deflection test, and a parts list. Call (831) 610-5598 for an exact number.
Serving Oakland, CA - Our Local Coverage Area
We’re based in the Oakland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Oakland
Yes, we can, and we do it regularly in Oakland’s older housing stock. The fix is shimming and truing the wall before the panel goes up, so the glass never carries tension at the hinge points. We won’t force a panel onto a wall that’s drifted more than a half inch out of plumb, because the tempered glass will crack at the drill holes. Call (831) 610-5598 and we’ll check your wall for free.
Usually it’s the rollers plus corrosion on the track itself. In foggy Oakland Hills bathrooms, marine air pits the plated hardware, and once the roller bearings go rough, the door binds. We replace the rollers with all-stainless Mr-Glass OEM parts and clean or replace the track at the same time. Sometimes the track itself is pitted beyond use, and that’s a replacement call. We’ll tell you which one you’re looking at when we inspect it.
In most cases, no, because a direct enclosure swap on an existing curb is considered a finish-level repair, not a plumbing or structural change. The exception is when the curb or pan is being rebuilt, or when a tub-to-shower conversion changes the drain location. In those cases, we pull the Oakland permit and the inspection gets signed off before we call the job done.
Sometimes, yes. If the panels are intact, not etched, and the dimensions fit the new pan layout, we can remount them with new Mr-Glass hardware and seals. But if the edge has chips or the mineral etching has penetrated the glass surface, reusing them is a safety risk, and we’ll recommend replacement. We’ll show you the condition on-site before you decide.
Rarely. The glass is almost never the source. The leak is usually at the curb seal or the bottom track weep holes, and in an older Craftsman, the curb has often settled or the subfloor has flexed enough to break the silicone bead. We level the curb, reseal the perimeter, and check the drain path before we blame anything. Call (831) 610-5598 and we’ll track down the actual source.
Service Areas Near Oakland
Bradford Remodeling Co San Francisco serves the full Oakland service area, including Montclair, Oakmore, Rockridge, and the flatlands. We also take Mr-Glass work in Mr-Glass service in San Francisco, Berkeley, and down the Peninsula through Mr-Glass service in San Mateo. If you’re in Hayward or Emerald Lake Hills, call and we’ll confirm coverage.
Book Your Mr-Glass Service in Oakland Today
Call (831) 610-5598 to schedule your free Mr-Glass estimate in Oakland. We’ll come out, check the curb, check the walls, and hand you a written price before any work starts. The estimate is free, and the quote does not move at the door.
Written by Curtis Lane, Owner at Bradford Remodeling Co San Francisco, serving Oakland since 2004.
