A Bradford company - serving San Francisco, CA
An open living room and dining area after a whole-home remodel

Techo-Bloc Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Francisco
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Techo-Bloc Fence Installation: The San Francisco Owner’s Guide

Techo-Bloc fence installation in San Francisco typically runs $4,130 to $10,620 for a complete post-and-panel run, depending on linear footage, post depth, and whether we’re pulling permits for a new fence line or replacing existing footings. Most replacement jobs take one to two days on site once materials are staged. You’ll know a Techo-Bloc fence is failing the same way every owner finds out: a post starts leaning after a winter storm, a panel rocks loose at the base, or you notice hairline cracking where the post meets the footing from years of wet-dry cycles in ocean air.

Call (831) 610-5598

We are an independent contractor, not a Techo-Bloc dealer or affiliate. But we install their fence systems regularly, and we know what holds up in San Francisco’s specific conditions. Curtis Lane runs point on fence jobs, and he’s the one who’ll tell you straight whether a repair makes sense or a full replacement is cheaper in the long run.

Which Techo-Bloc Models This Applies To

An open living space after a whole-home remodel

Techo-Bloc’s fence product lines split into two camps: the Rafale series, which uses modular concrete posts with wood or composite panels, and the Industria line, which is all-concrete post-and-panel construction meant for property lines and sound dampening. The compatibility gotcha most San Francisco homeowners hit is this: Rafale posts have a routed channel sized for specific panel thicknesses. If you bought the house with a Techo-Bloc fence already installed and a panel rotted out, you can’t just drop in a pressure-treated 2×4 fence board from a lumberyard. The channel spec doesn’t match, and you’ll end up with a panel that rattles in the wind or won’t seat flush at the post cap.

For identifying what you have, look at the post cap. Rafale caps are rounded and stamped with the Techo-Bloc name on the underside. Industria caps are flat, wider than the post face, and set with four torx screws. Take a photo of that cap and a tape measure across the panel width, and we can usually confirm the series before we come out.

On OEM versus aftermarket: Techo-Bloc’s own panels and connectors are cast to their manufacturing tolerances, and in a city with as much ground movement as San Francisco, those tolerances matter. Aftermarket post brackets and panel clips exist, but we’ve pulled too many of them off fences in the Sunset and Ingleside where the powder coating was already failing within two seasons. For post-and-panel structural pieces, we recommend sticking with Techo-Bloc parts. For fasteners and concrete footings, we use commercial-grade equivalents that exceed what the factory ships.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Techo-Bloc Fence Installation Is Failing

  • Post lean after rain. A Techo-Bloc post that tilts more than an inch out of plumb usually means the footing was poured too shallow or the base material washed out. In San Francisco’s heavy clay soils, water pushes sideways against a buried post every winter. The post itself rarely fails; the footing does.
  • Panel rocking at the base channel. When a Rafale or Industria panel moves side to side at the bottom but not the top, the connecting clip or channel spacer has cracked. This is the most common failure we see after a few seasons of wind coming off the ocean in the Richmond and Outer Sunset neighborhoods.
  • Cracking where post meets footing. Hairline cracks at the post base are normal after five to seven years, but if the crack widens to a quarter inch or you see spalling chips falling away, moisture has gotten into the post core. Once that begins, the post will not improve on its own.
  • Fence gate binds or won’t latch. Techo-Bloc gate posts carry four times the lateral load of a line post. A gate that starts dragging on the latch side is telling you the gate post footing has shifted. Adjusting the hinges buys you time but doesn’t fix the cause.
  • White chalky residue on post faces. This is efflorescence, not structural failure, but it means water is moving through the concrete. It’s cosmetic on its own, though it often signals a drainage problem at the base that will eventually undermine the footing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished basement family room with a media wall and wet bar

For a typical San Francisco yard, figure between $4,130 and $10,620 for a complete Techo-Bloc fence replacement. The spread comes down to four things: linear footage, whether the existing footings are sound enough to reuse, access to the work site, and whether we’re replacing panels only or pulling posts and repouring footings.

Here’s the breakdown of what you’re paying for:

  • Post replacement with new concrete footing: $220 to $420 per post, including excavation, gravel base, and concrete. Techo-Bloc posts run roughly $180 to $340 each depending on height and series.
  • Panel replacement: $85 to $185 per linear foot for Rafale or Industria panels, including connectors and post cap re-seating.
  • Full removal of old fence and debris haul: $700 to $1,400 depending on length and access. San Francisco debris disposal rates push this higher than most cities.
  • Permit and inspection: $400 to $900 when required. San Francisco requires a permit for any fence over six feet or any fence in a front setback, and we pull the permit ourselves, so that number is already accounted for in our written quote.

Every quote includes a written line-item breakdown before work starts. No numbers move at the door. The 365-Day Done Right Promise covers the full installation: if a post shifts, a panel cracks at the connection, or a gate binds inside one year from job close, we come back and fix it at no charge.

DIY or Call Us?

There are things you can safely check on your own: whether a panel is simply unseated from its channel, whether a hinge screw has backed out, whether leaves have packed in against the post base and trapped water. Those are maintenance items, and a homeowner with a cordless drill can handle them.

What you should not attempt is pulling and resetting a Techo-Bloc post. A six-foot concrete post with a wet footing weighs over 250 pounds. When it goes over, it goes fast. And a post that’s been pulled needs its footing excavated to the frost line, backfilled with gravel, and repoured with concrete mixed for San Francisco’s soil conditions. Get that wrong and you’re redoing the job in two winters. That’s where it’s worth a call. We’ll come out, confirm which series you have, and give you a written price. Straight number, real scope, no surprises at close-out. Call (831) 610-5598 for a free estimate.

FAQs

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Getting started with Bradford in San Francisco

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your San Francisco team

A local crew that works across San Francisco and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Francisco? Licensed & insured · Free written quotes response · free estimates
Call (831) 610-5598
Areas We Serve

Request a Free Estimate in San Francisco

Tell us what you need - Bradford Remodeling Co San Francisco responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and consent to receive communications by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch